Electrohydraulic device for keeping door in open position ABLOY® FD440

Field of Application

Internal and external large-dimensioned doors subject to pressure and heavy load by maximum weight of 120 kg and maximal width of door leaf 1400 mm. When the door is equipped with sliding pulling device its maximum weight is 80 kg and maximum width of door leaf is 1100 mm.

Features

• Closing force according to the European standard EN1154:
  class 2-6 with pulling devices 7199 и FD499;
  class 1-4 with pulling devices DC194 и FD499
• Door open position from 70°;
• Operating voltage 24V DC; current drain 90mА;
• Closing and final closing can be adjusted separately;
• Opening brake as individual function;
• Packing includes mounting plate;
• Colour of steel cover corresponds to colour spectrum of covers for closers;
• When installed from the side of opening it is also required to install ABLOY® FD140 (mounting box with cable);
• Designed for use with any standard or sliding pulling device.

Device for keeping the active leaf of double-leaf door in open position ABLOY® FD450

Field of Application

Two-leaf doors with max weight of active leaf 100 kg and by max width 1250 mm.

Features

• Electromechanical device for keeping the active leaf or both leaves in open position;
• Open position of door is 80° - 130°;
• Current consumption 1 х 60 mA;
• Used with two closers of DC240 type or with two DC250;
• Colour spectrum corresponds to the colour spectrum of covers for closers.
• Installation only from the hand of door.

Normally the passive leaf is closed (1) and remains open if someone keeps it open. When power supply is off (for example, sensor responds to smoke) the passive leaf (2) is closing.

Mural magnet ABLOY® 7438 and floor magnet ABLOY® 7439

• Operating voltage 24V DC;
• Retention force of door 50 kg;
• Current drain 16mА.